D-Link xStack DGS-3600 Series Cli Manual page 229

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configurations for a previously created 802.1x Guest VLAN.
DGS-3627:5#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Setting
-----------------------------------------------------------
Guest VLAN : Tiberius
Enable guest VLAN ports: 5-8
DGS-3627:5#
delete 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously created 802.1x Guest VLAN.
DGS-3627:5#delete 802.1x guest_vlan Zira
Command: delete 802.1x guest_vlan Zira
Success.
DGS-3627:5#
Used to view the configurations for a 802.1x Guest VLAN.
show 802.1x guest_vlan
The show 802.1x guest_vlan command is used to display the settings for
the VLAN that has been enabled as an 802.1x Guest VLAN. Guest 802.1X
VLAN clients are those who have not been authorized for 802.1x or they
haven't yet installed the necessary 802.1x software, yet would still like limited
access rights on the Switch.
None.
None.
Used to delete an 802.1x Guest VLAN.
delete 802.1x guest_vlan <vlan_name 32>
The delete 802.1x guest_vlan command is used to delete a VLAN that has
been enabled as an 802.1x Guest VLAN. 802.1x Guest VLAN clients are
those who have not been authorized for 802.1x or they haven't yet installed
the necessary 802.1x software, yet would still like limited access rights on
the Switch.
None.
Only administrator-level users can issue this command. This VLAN is only
supported for port-based 802.1x and must have already been previously
created using the create vlan command. Only one VLAN can be set as the
802.1x Guest VLAN.
226