D-Link xStack DGS-3600 Series Cli Manual page 99

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
show stp ports
Parameters
Restrictions
Example usage:
To show STP ports 1 through 9:
DGS-3627:5#show stp ports 1-9
Command: show stp ports 1-9
MSTP Port Information
----------------------
Port Index
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Port Forward BPDU enabled
MSTI Designated Bridge
----- ------------------
0 8000/0050BA7120D6
1 8001/0053131A3324
CTRL+C ESC q
show stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DGS-3627:5#show stp instance_id 0
Command: show stp instance_id 0
STP Instance Settings
---------------------------
Instance Type
Instance Status
Instance Priority
STP Instance Operational Status
--------------------------------
Designated Root Bridge : 32766/00-90-27-39-78-E2
External Root Cost
Regional Root Bridge
Internal Root Cost
Designated Bridge
Root Port
Max Age
Forward Delay
<portlist> − Specifies a range of ports to be configured. The beginning
and end of the port list range are separated by a dash.
None
: 1 , Hello Time: 2 /2
Internal PathCost
-----------------
200000
200000
Quit SPACE n Next Page
Used to display the Switch's STP instance configuration
show stp instance_id {<value 0-15>}
This command displays the Switch's current STP Instance Settings
and the STP Instance Operational Status.
<value 0-15> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
configuration for the CIST internally set on the Switch.
None.
: CIST
: Enabled
: 32768(bridge priority : 32768, sys ID ext : 0 )
: 200000
: 32768/00-53-13-1A-33-24
: 0
: 32768/00-50-BA-71-20-D6
: 1
: 20
: 15
, Port STP enabled LBD: Yes
Prio Status
---- ----------
128 Forwarding
128 Forwarding
p Previous Page r Refresh
96
Role
----------
Root
Master