D-Link xStack DGS-3600 Series Cli Manual page 344

D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xStack DGS-3600 Series:
Table of Contents

Advertisement

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config ospf aggregation
Description
Parameters
Restrictions
Usage example
To configure the OSPF area aggregation settings:
DGS-3627:5#config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type
summary advertise enable
Command: config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type
summary advertise enable
Success.
DGS-3627:5#
show ospf aggregation
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display OSPF area aggregation settings:
DGS-3627:5#show ospf aggregation
Command: show ospf aggregation
OSPF Area Aggregation Settings
Area ID
------------
10.1.1.1
244.0.0.6
This command is used to configure the OSPF area aggregation settings.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
<network_address> − The 32-bit number in the form of an IP address that
uniquely identifies the network that corresponds to the OSPF Area.
lsdb_type − The type of address aggregation. The user has two choices
for the LSDB type:
summary – Choosing this LSDB type will summarize routes that
are entering the OSPF area by redistribution.
advertise [enable | disable] − Allows for the advertisement
trigger to be enabled or disabled.
nssa_ext – Choosing this LSDB type will summarize routes that
are entering the OSPF NSSA from an external source.
advertise [enable | disable]
trigger to be enabled or disabled.
Only administrator-level and operator-level users can issue this command.
Used to display the current OSPF area aggregation settings.
show ospf aggregation {<area_id>}
This command will display the current OSPF area aggregation settings.
<area_id> − Enter this parameter to view this table by a specific OSPF
area ID.
None.
Aggregated
LSDB
Network Address Type
---------------------
--------------
10.0.0.0/8
Summary
11.0.0.0/8
NSSA-Ext
Allows for the advertisement
Advertise
-------------
Enabled
Enabled
341

Advertisement

Table of Contents
loading

Table of Contents