D-Link xStack DGS-3600 Series Cli Manual page 53

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
delete trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a trusted host with an IP address 10.48.74.121:
DGS-3627:5#delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DGS-3627:5#
enable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
enable snmp authenticate traps
Purpose
Syntax
Description
Used to delete a trusted host entry made using the create
trusted_host command above.
delete trusted host [ipaddr <ipaddr> | network
<network_address> | all]
This command is used to delete a trusted host entry made using the
create trusted_host command above.
<ipaddr> − The IP address of the trusted host.
network <network_address> − IP address and netmask of the
trusted host to be deleted. The address and mask information can be
specified using the traditional format (for example, 10.1.2.3/255.0.0.0
or in CIDR format, 10.1.2.3/8).
all – Enter this parameter to delete all configured trusted hosts.
Only administrator-level users can issue this command.
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap
support on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#enable snmp traps
Command: enable snmp traps
Success.
DGS-3627:5#
Used to enable SNMP authentication trap support.
enable snmp authenticate traps
This command is used to enable SNMP authentication trap support
50