D-Link xStack DGS-3600 Series Cli Manual page 41

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3627:5#show snmp user
Command: show snmp user
Username
----------------------------------- ------------------------------------------ --------------------------
initial
Total Entries: 1
DGS-3627:5#
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
DGS-3627:5#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DGS-3627:5#
Group Name
initial
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
view type – Sets the view type to be:
• included − Include this object in the list of objects that an
SNMP manager can access.
• excluded − Exclude this object from the list of objects that
an SNMP manager can access.
Only administrator-level users can issue this command.
38
VerAuth-Priv
V3NoneNone