D-Link xStack DGS-3600 Series Cli Manual page 177

D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xStack DGS-3600 Series:
Table of Contents

Advertisement

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
To delete a multicast VLAN called "accounting":
DGS-3627:5#delete igmp_snooping multicast_vlan accounting
Command: delete igmp_snooping multicast_vlan accounting
Success.
DGS-3627:5#
show igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show a multicast VLAN:
DGS-3627:5#show igmp_snooping multicast_vlan accounting
Command: snow igmp_snooping multicast_vlan accounting
VID
Member Ports
Source Ports
Status
Replace Source IP : 0.0.0.0
DGS-3627:5#
config igmp_snooping multicast_vlan_group
Purpose
Syntax
Description
Parameters
Used to display the settings of a multicast VLAN on the Switch.
show igmp_snooping multicast_vlan {<vlan_name 32>}
This command allows you to display the settings of a multicast VLAN on
the Switch.
<vlan_name 32> − The name of the multicast VLAN to be displayed. This
name may be up to 32 characters in length.
None.
: 2
VLAN Name
: 4-5
: 6
: Enabled
Used to add or remove multicast addresses to or from a previously created
Multicast VLAN.
config igmp_snooping multicast_vlan_group <vlan_name 32> [add
multicast_range <range_name 32> | delete multicast_range
[<range_name 32> | all]]
This command allows users to configure the multicast group which will be
learned with the specific multicast VLAN.
<vlan_name 32> − The name of the multicast VLAN for which IGMP
snooping is to be configured. This name may be up to 32 characters in
length.
add multicast_range <range_name 32> - Use this parameter to add a
multicast address or list of multicast addresses to this multicast VLAN as
defined by a range. This range was created using the limited multicast
address commands.
delete multicast_range <range_name 32> - Use this parameter to delete a
multicast address or list of multicast addresses to this multicast VLAN as
defined by a range. This range was created using the limited multicast
address commands.
all - Enter this parameter to remove all multicast addresses range names
: accounting
174

Advertisement

Table of Contents
loading

Table of Contents