D-Link xStack DGS-3600 Series Cli Manual page 418

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
enable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SIM on the Switch:
disable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SIM on the Switch:
show sim
Purpose
Syntax
Description
Used to enable Single IP Management (SIM) on the Switch
enable sim
This command will enable SIM globally on the Switch. SIM features
and functions will not function properly unless this function is
enabled.
None.
Only administrator-level users can issue this command.
DGS-3627:5#enable sim
Command: enable sim
Success.
DGS-3627:5#
Used to disable Single IP Management (SIM) on the Switch.
disable sim
This command will disable SIM globally on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3627:5#disable sim
Command: disable sim
Success.
DGS-3627:5#
Used to view the current information regarding the SIM group on the
Switch.
show sim {[candidates {<candidate_id 1-100>} | members
{<member_id 1-32>} | group {commander_mac <macaddr>} |
neighbor]}
This command will display the current information regarding the SIM
group on the Switch, including the following:
SIM Version - Displays the current Single IP Management version on
the Switch.
Firmware Version - Displays the current Firmware version on the
Switch.
Device Name - Displays the user-defined device name on the Switch.
415