D-Link xStack DGS-3600 Series Cli Manual page 380

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
delete authen server_host
Restrictions
Example usage:
To delete a user-defined TACACS+ authentication server host:
DGS-3627:5#delete authen server_host 10.1.1.121 protocol tacacs+
Command: delete authen server_host 10.1.1.121 protocol tacacs+
Success.
DGS-3627:5#
show authen server_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server hosts currently set on the Switch:
TACACS protocol.
xtacacs - Enter this parameter if the server host utilizes the
XTACACS protocol.
tacacs+ - Enter this parameter if the server host utilizes the
TACACS+ protocol.
radius - Enter this parameter if the server host utilizes the
RADIUS protocol.
Only administrator-level users can issue this command.
Used to view a user-defined authentication server host.
show authen server_host
This command is used to view user-defined authentication server hosts
previously created on the Switch.
The following parameters are displayed:
IP Address – The IP address of the authentication server host.
Protocol – The protocol used by the server host. Possible results will
include TACACS, XTACACS, TACACS+ or RADIUS.
Port – The virtual port number on the server host. The default value is 49.
Timeout - The time in seconds the Switch will wait for the server host to
reply to an authentication request.
Retransmit - The value in the retransmit field denotes how many times
the device will resend an authentication request when the TACACS
server does not respond. This field is inoperable for the tacacs+ protocol.
Key - Authentication key to be shared with a configured TACACS+ server
only.
None.
None.
DGS-3627:5#show authen server_host
Command: show authen server_host
IP Address Protocol
--------------- --------
10.53.13.94 TACACS
Total Entries : 1
DGS-3627:5#
Port Timeout Retransmit Key
----- ------- --------------- ------------------
49 5 2
377
No Use