D-Link xStack DGS-3600 Series Cli Manual page 391
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To configure SSH algorithm:
show ssh algorithm
Purpose
Syntax
Description
Used to configure the SSH algorithm.
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour |
blowfish | cast128 | twofish128 | twofish192 | twofish256 | MD5 | SHA1 |
RSA | DSA] [enable | disable]
This command allows users to configure the desired type of SSH algorithm
used for authentication encryption.
3DES – This parameter will enable or disable the Triple_Data Encryption
Standard encryption algorithm.
AES128 - This parameter will enable or disable the Advanced Encryption
Standard AES128 encryption algorithm.
AES192 - This parameter will enable or disable the Advanced Encryption
Standard AES192 encryption algorithm.
AES256 - This parameter will enable or disable the Advanced Encryption
Standard AES256 encryption algorithm.
arcfour - This parameter will enable or disable the Arcfour encryption
algorithm.
blowfish - This parameter will enable or disable the Blowfish encryption
algorithm.
cast128 - This parameter will enable or disable the Cast128 encryption
algorithm.
twofish128 - This parameter will enable or disable the twofish128 encryption
algorithm.
twofish192 - This parameter will enable or disable the twofish192 encryption
algorithm.
twofish256 - This parameter will enable or disable the twofish256 encryption
algorithm.
MD5 - This parameter will enable or disable the MD5 Message Digest
encryption algorithm.
SHA1 - This parameter will enable or disable the Secure Hash Algorithm
encryption.
RSA - This parameter will enable or disable the RSA encryption algorithm.
DSA - This parameter will enable or disable the Digital Signature Algorithm
encryption.
[enable | disable] – This allows users to enable or disable algorithms entered
in this command, on the Switch.
Only administrator-level and operator-level users can issue this command.
DGS-3627:5# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
Success.
DGS-3627:5#
Used to display the SSH algorithm setting.
show ssh algorithm
This command will display the current SSH algorithm setting status.
388
Advertisement
Table of Contents
