D-Link xStack DGS-3600 Series Cli Manual page 421

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Total Entries: 3
DGS-3627:5#
reconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
config sim_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add a member:
To delete a member:
Used to connect to a member switch, through the commander switch,
using telnet.
reconfig {member_id <value 1-32 | exit}
This command is used to reconnect to a member switch using Telnet.
member_id <value 1-32> - Select the ID number of the member
switch the user desires to configure.
exit – This command is used to exit from managing the member
switch and will return to managing the commander switch.
Only administrator-level users can issue this command.
DGS-3627:5#reconfig member_id 2
Command: reconfig member_id 2
DGS-3627:5#
Login:
Used to add candidates and delete members from the SIM group.
config sim [add <candidate_id 1-100> {<password>} | delete
<member_id 1-32>]
This command is used to add candidates and delete members from
the SIM group by ID number.
add <candidate_id 1-100> <password> - Use this parameter to
change a candidate switch (CaS) to a member switch (MS) of a SIM
group. The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Only administrator-level users can issue this command.
DGS-3627:5#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK!!!
SIM Config Success !!!
Success.
DGS-3627:5#
418