D-Link xStack DGS-3600 Series Cli Manual page 261

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
delete sflow counter_poller ports
Parameters
Restrictions
Example usage:
To delete the sFlow counter poller settings:
DGS-3627:5#delete sflow counter_poller ports all
Command:delete sflow counter_poller ports all
Success.
DGS-3627:5#
show sflow counter_poller
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the sFlow counter poller settings:
DGS-3627:5#show sflow counter_poller
Command:show sflow counter_poller
Port
--------
1
Total Entries : 1
DGS-3627:5#
create sflow flow_sampler ports
Purpose
Syntax
Description
<portlist> - Use this parameter to delete the ports that will be mined
for sFlow information.
all – Use this parameter to delete all ports to be mined for sFlow
information.
Only administrator-level and operator-level users can issue this
command.
Used to display the counter poller for the sFlow function of the
switch.
show sflow counter_poller
This command will allow the user to display the Switch's counter
poller.
None.
Only administrator-level and operator-level users can issue this
command.
Analyzer Server ID Polling Interval
------------------------- -----------------------
1 20
Used to configure the flow sampler settings for the sFlow function.
create sflow flow_sampler ports [<portlist> | all]
analyzer_server_id <value 1-4> {rate <value 0-65535> |
maxheadersize <value 18-256>
This command will allow users to configure the Switch's settings for
taking sample packets from the network, including the sampling rate
and the amount of the packet header to be extracted.
258