D-Link xStack DGS-3600 Series Cli Manual page 376

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config authen application
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the default method list for the web interface:
DGS-3627:5#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
---------------- --------
Permit 1
2
3
4
default 1
2
Total Entries : 2
DGS-3627:5#
Used to configure various applications on the Switch for
authentication using a previously configured method list.
config authen application [console | telnet | ssh | http | all] [login
| enable] [default | method_list_name <string 15>]
This command is used to configure Switch configuration applications
(console, Telnet, SSH, HTTP) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
application – Choose the application to configure. The user may
choose one of the following five options to configure.
console – Choose this parameter to configure the command
line interface login method.
telnet – Choose this parameter to configure the Telnet login
method.
ssh – Choose this parameter to configure the Secure Shell
login method.
http – Choose this parameter to configure the web interface
login method.
all – Choose this parameter to configure all applications
(console, Telnet, SSH, web) login method.
login – Use this parameter to configure an application for normal login
on the user level, using a previously configured method list.
enable - Use this parameter to configure an application for upgrading
a normal user level to administrator privileges, using a previously
configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 15> - Use this parameter to configure an
application for user authentication using a previously configured
method list. Enter a alphanumeric string of up to 15 characters to
define a previously configured method list.
Only administrator-level users can issue this command.
--------------- ------------------
tacacs+ Built-in Group
tacacs Built-in Group
ctsnow User-defined Group
local Keyword
tacacs+ Built-in Group
local Keyword
373