D-Link xStack DGS-3600 Series Cli Manual page 175

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3627:5#show router_ports
Command: show router_ports
VLAN Name
Static router port
Dynamic router port :
Forbidden router port :
Total Entries: 1
DGS-3627:5#
show igmp_snooping forwarding
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the IGMP snooping forwarding table for VLAN "Marcello":
create igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a multicast VLAN:
: default
: 1-2, 10
Used to display the IGMP snooping forwarding table entries on the
Switch.
show igmp_snooping forwarding {vlan <vlan_name 32>}
This command will display the current IGMP snooping forwarding
table entries currently configured on the Switch.
<vlan_name 32> − The name of the VLAN for which to view IGMP
snooping forwarding table information.
None.
DGS-3627:5#show igmp_snooping forwarding vlan Marcello
Command: show igmp_snooping forwarding vlan Marcello
VLAN Name : Marcello
Source IP : 198.19.1.2
Multicast group : 239.1.1.1
Port Member : 11
Total Entries: 1
DGS-3627:5#
Used to create a multicast VLAN on the Switch.
create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-
4094>
This command allows you to create a multicast VLAN on the Switch.
<vlan_name 32> − The name of the multicast VLAN to be created. This
name may be up to 32 characters in length.
<vlanid 2-4094> - The corresponding VLAN ID of the multicast VLAN to be
created.
Only administrator-level and operator-level users can issue this command.
172