D-Link xStack DGS-3600 Series Cli Manual page 322

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
To create the settings to determine a static RP:
DGS-3627:5#create pim static_rp group 231.0.0.1/32 rp 11.1.1.1
Command: create pim static_rp group 231.0.0.1/32 rp 11.1.1.1
Success.
DGS-3627:5#
delete pim static_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To remove the multicast group IP address used in identifying the Rendezvous Point (RP).:
DGS-3627:5#delete pim static_rp group 231.0.0.1/32
Command: delete pim static_rp group 231.0.0.1/32
Success.
DGS-3627:5#
show pim static_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the static RP settings as configured for the multiple access network:
To remove the multicast group IP address used in identifying the
Rendezvous Point (RP).
delete pim static_rp group <network_address>
This command will remove the multicast group IP address used in
identifying the Rendezvous Point (RP). This command is for PIM-SM
configurations only.
group <network_address> - Enter the multicast group IP address used
in identifying the Rendezvous Point (RP). This address must be a class
D address.
Only administrator-level and operator-level users can issue this
command.
To show the Static Rendezvous Point (RP) settings.
show pim static_rp
This command will display the Static Rendezvous Point (RP) settings.
This command is for PIM-SM configurations only.
None.
None.
319