D-Link xStack DGS-3600 Series Cli Manual page 266

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3627:5#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DGS-3627:5#
show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DGS-3627:5#show sntp
Command: show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DGS-3627:5#
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the
source IP address, time and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 720 sec
To enable SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP
support will override any manually configured system time settings.
None.
Only administrator-level and operator-level users can issue this
command. SNTP settings must be configured for SNTP to function
(config sntp).
263