D-Link xStack DGS-3600 Series Cli Manual page 164

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Example usage:
To configure The IPv6 ND Neighbor Solicitation messages:
DGS-3627:5# config ipv6 nd ns ipif Zira retrans_time 1000000
Command: config ipv6 nd ns ipif Zira retrans_time 1000000
Success.
DGS-3627:5#
show ipv6 nd
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the neighbor detection parameters for IPv6:
DGS-3627:5#show ipv6 nd
Command: show ipv6 nd
Interface Name
Hop Limit
NS Retransmit Time
Router Advertisement
RA Max Router AdvInterval : 600 (s)
RA Min Router AdvInterval : 198 (s)
RA Router Life Time
RA Reachable Time
RA Retransmit Time
RA Managed Flag
RA Other Config Flag
Interface Name
Hop Limit
NS Retransmit Time
Router Advertisement
RA Max Router AdvInterval : 100 (s)
RA Min Router AdvInterval
RA Router Life Time
RA Reachable Time
RA Retransmit Time
RA Managed Flag
RA Other Config Flag
Prefix
3FFE:501:FFFF:100::/64
DGS-3627:5#
Used to display information regarding Neighbor Detection on the switch.
show ipv6 nd {ipif <ipif_name 12>}
This command is used to show information regarding the IPv6 Neighbor
Detection function of the switch. Users may specify an IP interface for which to
view this information.
ipif <ipif_name 12> - Enter the IP interface of the IPv6 interface for which to
view this information. Omitting this parameter will display all information
regarding neighbor detection currently set on the switch.
Only administrator-level and operator-level users can issue this command.
: System
: 64
: 0 (ms)
: Disabled
: 1800 (s)
: 1200000 (ms)
: 0 (ms)
: Disabled
: Disabled
: Zira
: 10
: 50000 (ms)
: Enabled
: 50 (s)
: 1000 (s)
: 10000 (ms)
: 50000 (ms)
: Enabled
: Enabled
Preferred
604800
Valid OnLink Autonomous
2592000 Enabled Enabled
161