D-Link xStack DGS-3600 Series Cli Manual page 37
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
enable snmp
Example Usage:
To enable SNMP:
disable snmp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SNMP:
DGS-3627:5#disable snmp
Command: disable snmp
Success.
DGS-3627:5#
enable snmp linkchange_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable SNMP linkchange traps:
command.
DGS-3627:5#enable snmp
Command: enable snmp
Success.
DGS-3627:5#
Used to disable SNMP on the Switch.
disable snmp
This command is used, in conjunction with the enable snmp
command above, to enable and disable Simple Network Management
Protocol (SNMP) on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
Used to enable SNMP link change traps on the Switch.
enable snmp linkchange_traps
This command is used, in conjunction with the disable snmp
linkchange_traps command below, to enable and disable SNMP
linkchange traps on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
34
Advertisement
Table of Contents
