D-Link xStack DGS-3600 Series Cli Manual page 90
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Command
show stp
show stp ports
show stp instance_id
show stp mst_config id
Each command is listed, in detail, in the following sections.
enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
Parameters
{<portlist>}
{<value 0-15>}
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree Protocol to be globally enabled
on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#enable stp
Command: enable stp
Success.
DGS-3627:5#
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally disabled
on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#disable stp
Command: disable stp
Success.
DGS-3627:5#
87
Advertisement
Table of Contents
