D-Link xStack DGS-3600 Series Cli Manual page 423

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3627:5# config sim hold_time 120
Command: config sim hold_time 120
Success.
DGS-3627:5#
To transfer the CS (commander) to be a CaS (candidate):
DGS-3627:5# config sim candidate
Command: config sim candidate
Success.
DGS-3627:5#
To transfer the Switch to be a CS:
DGS-3627:5# config sim commander
Command: config sim commander
Success.
DGS-3627:5#
To update the name of a group:
DGS-3627:5# config sim commander group_name Demetrius
Command: config sim commander group_name Demetrius
Success.
DGS-3627:5#
download sim_ms
Purpose
Syntax
Description
Parameters
Used to download firmware or configuration file to an indicated
device.
download sim [firmware_from_tftp | configuration_from_tftp]
<ipaddr> <path_filename> {[members <mslist 1-32> | all]}
This command will download a firmware file or configuration file to a
specified device from a TFTP server.
firmware_from_tftp – Specify this parameter to download firmware to
members of a SIM group.
configuration_from_tftp - Specify this parameter to download a switch
configuration to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members the user
prefers to download firmware or switch configuration files to. The user
may specify a member or members by adding one of the following:
<mslist 1-32> - Enter a value, or values to specify which
members of the SIM group will receive the firmware or switch
configuration.
all – Add this parameter to specify all members of the SIM
group will receive the firmware or switch configuration.
420