D-Link xStack DGS-3600 Series Cli Manual page 406

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config lldp ports basic_tlvs
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To configure exclude the system name TLV from the outbound LLDP advertisements for all ports:
DGS-3627:5#config lldp ports 1:1-1:2 mgt_addr ipv4 192.168.254.10
enable
Command: config lldp ports 1:1-1:2 mgt_addr ipv4 192.168.254.10
enable
Success.
DGS-3627:5#
Used to configure an individual port or group of ports to exclude one
or more optional TLV data types from outbound LLDP advertisements.
config lldp ports [<portlist>|all] basic_tlvs [all | {port_description |
system_name | system_description | system_capabilities}] [enable |
disable]
An active LLDP port on the switch always includes the mandatory
data in its outbound advertisements. And there are four optional data
that can be configured for an individual port or group of ports to
exclude one or more of these data types from outbound LLDP
advertisements. The mandatory data type include four basic types of
information (end f LLDPDU TLV, chassis ID TLV, port ID TLV, and
Time to Live TLV). The mandatory type can not be disabled. There
are also four data types which can be optionally selected. They are
port_description, system_name, system_description, and
system_capability.
<portlist>- Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
port_description – This TLV optional data type indicates that LLDP
agent should transmit 'Port Description TLV on the port. The default
state is disabled.
system_name – This TLV optional data type includes indicates that
LLDP agent should transmit 'System Name TLV'. The default state is
disabled.
system_description – This TLV optional data type includes indicates
that LLDP agent should transmit 'System Description TLV'. The
default state is disabled.
system_capabilities – This TLV optional data type includes indicates
that LLDP agent should transmit 'System Capabilities TLV'. The
system capability will indicate whether the device provides repeater,
bridge, or router function, and whether the provided functions are
currently enabled. The default state is disabled.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DGS-3627:5#
403