D-Link xStack DGS-3600 Series Cli Manual page 309
D-link xstack dgs-3600 series layer 3 gigabit ethernet managed switch
Hide thumbs
Also See for xStack DGS-3600 Series:
- User manual (433 pages) ,
- Hardware installation manual (66 pages) ,
- Reference manual (546 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
To change the RIP receive mode for the IP interface System:
DGS-3627:5#config rip ipif System rx_mode v1_only
Command: config rip ipif System rx_mode v1_only
Success.
DGS-3627:5#
enable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RIP:
disable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable RIP:
Used to enable RIP.
enable rip
This command is used to enable RIP on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#enable rip
Command: enable rip
Success.
DGS-3627:5#
Used to disable RIP.
disable rip
This command is used to disable RIP on the Switch.
None.
Only administrator-level and operator-level users can issue this
command.
DGS-3627:5#disable rip
Command: disable rip
Success.
DGS-3627:5#
306
Advertisement
Table of Contents
