D-Link xStack DGS-3600 Series Cli Manual page 384

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
config authen parameter attempt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of authentication attempts at 5:
show authen parameter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the authentication parameters currently set on the Switch:
DGS-3627:5#show authen parameter
Command: show authen parameter
Response timeout : 60 seconds
User attempts
DGS-3627:5#
Used to configure the maximum number of times the Switch will accept
authentication attempts.
config authen parameter attempt <int 1-255>
This command will configure the maximum number of times the Switch will
accept authentication attempts. Users failing to be authenticated after the
set amount of attempts will be denied access to the Switch and will be
locked out of further authentication attempts. Command line interface
users will have to wait 60 seconds before another authentication attempt.
Telnet users will be disconnected from the Switch.
parameter attempt <int 1-255> - Set the maximum number of attempts the
user may try to become authenticated by the Switch, before being locked
out.
Only administrator-level users can issue this command.
DGS-3627:5# config authen parameter attempt 5
Command: config authen parameter attempt 5
Success.
DGS-3627:5#
Used to display the authentication parameters currently configured on the
Switch.
show authen parameter
This command will display the authentication parameters currently configured
on the Switch, including the response timeout and user authentication
attempts.
This command will display the following fields:
Response timeout – The configured time allotted for the Switch to wait for a
response of authentication from the user attempting to log in from the
command line interface or telnet interface.
User attempts - The maximum number of attempts the user may try to
become authenticated by the Switch, before being locked out. The default
number of attempts for authentication is 3.
None.
None.
: 5
381