D-Link xStack DGS-3600 Series Cli Manual page 248

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
delete cpu access_profile
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
show cpu_access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CPU filtering state on the Switch:
DGS-3627:5#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Access Profile ID: 1
================================================================================
MASK Option :
VLAN
---------- ------
Access ID: 2
Ports: 1
---------------------
default
================================================================================
Total Entries: 1
DGS-3627:5#
Only administrator-level and operator-level users can issue this command.
DGS-3627:5#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-3627:5#
Used to view the CPU access profile entry currently set in the Switch.
show cpu access_profile {profile_id <value 1-5>}
The config cpu_interface_filtering state command is used view the current CPU
interface filtering entries set on the Switch.
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to identify
the CPU access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the create cpu access_profile
command. Entering this command without the profile ID parameter will display all
configured CPU access profiles.
None.
Mode: Permit
TYPE : Ethernet
245