Mazda 1990 323 Workshop Manual Supplement page 89

TRANSAXLE OIL, TRANSFER CARRIER OIL
J3
03UOJ3-01
03UOJ3-013
I
03UOJ3-01
03UOJ3-01
TRANSAXLE OIL
INSPECTION
Note
l
Park the vehicle on level ground.
1. Remove the check plug.
2. Verify that the oil is at the bottom of the plug
port.
If it is low, add the specified oil from plug port.
3. Install the check plug.
Tightening torque:
39-58 N*m (4.0-6.0 m-kg, 28-43 ft-lb)
REPLACEMENT
1, Remove the drain plug and washer. Drain the oil into a suita-
ble container.
2. Install a new washer and the drain plug.
Tightening torque:
39-58 N-m (4.0-6.0 m-kg, 28-43 ft-lb)
3. Add the necessary amount of the specified oil through the
check plug port.
Specified oil
All-season
: ATF (DEXRON-It, M-III)
Above -18OC (OOF): SAE 75W-90
Grade
: API service GL4
Capacity: 2.6 liters (2.7 US qt, 2.2 Imp qt)
4. Verify the oil level.
5. Install the check port plug.
Tightening torque:
39-58 N*m (4.0-6.0 m-kg, 28-43 ft-lb)
TRANSFER CARRIER OIL
INSPECTION
Note
l
Park the vehicle on level ground.
I. Remove the check plug.
2. Verify that the oil is at the bottom of the plug port.
If it is low, add the specified oil from plug port.
3. Install check plug.
Tightening torque:
39-58 N-m (4.0-6.0 m-kg, 28-43 ft-lb)
REPLACEMENT
1, Remove the drain plug. Drain the oil into a suitable container.
2. Install a new washer and the drain plug.
Tightening torque:
39-58 N,m (4.0-6.0 m-kg, 28-43 ft-lb)
J3-11