Mazda 1990 323 Workshop Manual Supplement page 305

ROAD TEST
K2
S-RANGE TEST
Shift Pattern
1. Shift the selector lever to S range.
.-
2. Accelerate the vehicle and verify that the l-2 and 2-3 upshifts, downshifts, and lockup are obtained. The
shift points must be as shown in the S range shift diagram.
S-range shift
diagram
4.0 (B/8)
3.5 (718)
3.1 (6/8)
2.7 (5/8)
2.3 (4/8)
1.9 (3/8)
1.4 (2/8)
0.9 (l/8)
0.4 (O/8)
0 LOCKUP AVAILABLE WHEN COASTING
m
LOCKUP AVAILABLE WHEN ACCELERATING AND CRUISING
-SHIFT UP
100
120 140 160
(63) (75)
(87) (99)
VEHICLE SPEED km/h (mph)
,^^' '^'I^ --
UJUUKZ-U/l b
._
3. While driving in S range and 3rd gear, select the Hold mode and verify that 3rd gear is held until the
3-2 downshift point as shown in the S range (Hold) shift diagram is achieved.
4. Accelerate the vehicle in S range (Hold) and verify that 2nd gear is held.
S-range (Hold) shift diagram
0 LOCKUP AVAILABLE WHEN COASTING
m
LOCKUP AVAILABLE WHEN ACCELERATING AND CRUISING
4.0 (8/8)
3.5 (718)
3.1 (6/8)
2.7 (5/8)
2.3 (4/8)
1.9 (3/8)
1.4 (218)
0.9 (l/8)
0.4 (018) /
---- SHIFT
DOWN
(8500)
100
120 140 160
(63)
(75) (87) (99)
7
-0D
VEHICLE SPEED km/h (mph)
K2-129