Mazda 1990 323 Workshop Manual Supplement page 515

REAR DIFFERENTIAL
M
03l J OMX-88
Differential case
1. Apply sealant to the case face.
2, Tighten the bolts.
Tightening torque:
23-26 N-m (2.3-2.7 m-kg, 10-20 ft-lb)
Oil seal (Output shaft)
Caution
l
Apply lithium-base grease to the new oil seal lip.
1. Install the new oil sea .I with the SST.
Output shaft
1 , Install new clips-
2. install the output shaft into the side gear: S
with a plastic hammer.
3. Verify that the output shafts are hooked
i
by pulling them by hand.
by lightly tapping
nto the side gears
M-31