Mazda 1990 323 Workshop Manual Supplement page 422

K2
TRANSAXLE AND TRANSFER UNIT
49 8531 555
Gauge block
For
adjustment of
pinion height
49 8531 568
For
adjustment of
Collar B
pinion height
-'
03UOK2-244
Disassembly / Inspection / Assembly
1. Disassemble in the order shown in the figure, referring to
Disassembly Note.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly, referring to
Assembly Note.
117-176(12-16, 86-130)
16-25 (1.6-2.6, 13-l
8-89 (6.9-9.1, 50-66)
N.m (m-kg, ft-lb)
I. Bolts
2. Lock plates
3. Bolts
4. Bearing caps
Disassembly Note . . . . . . . . . . . . . page K2-246
5. Adjusting nuts
Disassembly Note . . . . . . . . . . page K2-246
6. Bearing outer races (Side bearing)
7. Differential gear assembly
8. Locknut
Disassembly Note . . . . . . . . . . . . . . page K2-246
9. Washer
IO. Companion flange
Disassembly Note . . . . . . . . . . . . . . . . . . page K2-246
11. Oil seal
12. Drive pinion
Disassembly Note . . . . . . . . . . . page K2-246
Inspect splines for wear and damage
Assembly Note . . . . . . . . . . . . . . . page K2-247
13. Collapsible spacer
J
14. Bearing inner race
Inspect for damage and rough rotation
Assembly Note. . . . . . . . . . . . . . . . . . page K2-247
15. Bearing outer race
Disassembly
Note . . . . . . . . . . . . . . page K2-246
Assembly Note . . . . . . . . . . . . . . . . . . page K2-247
16. Bearing outer race
Disassembly Note . . . . . . . . . . . . . . . . . . page K2-246
Assembly
Note.. . . . . . . . . . . . . . . . . . . . . . page K2-247
17. Bearing outer race
Disassembly Note . . . . . . . . . . . . . page K2-247
Assembly Note . . . . . . . . . . . . . . . . . . . . . . . page K2-247
18. Spacer
Assembly Note . . . . . . . . . . . . . . page K2-247
19. Bearing inner race
Disassembly
Note . . . . . . . . . . . . . page K2-247
20. Bearing inner race
Disassembly Note . . . . . . . . . . . . . . . . . . page K2-247
21. Differential gear
Inspect individual gear teeth for wear and
cracks
-
22. Transfer carrier
K2-246