Mazda 1990 323 Workshop Manual Supplement page 43

INSTALLATION
m
03UOBX-82t
03UOBX-829
8. Tighten bolts @ in two or three steps in the order shown.
Tightening torque:
43-61 N*m (4.4-6.2 m-kg, 32-43 ft-lb)
9. Tighten nuts @.
Tightening torque:
67-93 N*m (6.8-9.5 m-kg, 49-69 ft-lb)
IO. Tighten the No.3 engine mount nuts @.
Tightening torque:
74-103 N,m (7.5-10.5 m-kg, 54-76 ft-lb)
11. Tighten nut @I.
Tightening torque:
67-93 N-m (6.8-9.5 m-kg, 49-69 ft-lb)
12. install the dynamic damper.
Tightening torque:
55-80 Narn (5.6-8.2 m-kg, 41-59 ft-lb)
13. Remove a chain hoist.
Step 3
Toraue
Snecifications
42-62 (4.3~-6.3, 31-46)
6.9-11 N.m (TO-110 cm-kg, 61-96 in-lb)
27-30 (2.,8-3.1, 20-22)
ATX
r
6.9-11 N&I (70-l 10 cm-kg,
9
61-95 in-lb)
\
1
ASKET, REPLACE
31-46 (3.2-4.7, 23-34)
21-27 (2.1-2.6,/15-20) 16-23 (1.6--2.i 12-17)
43-59 (4.4-6.0, 31--i3)
N.m (m-kg, ft-lb: