Mazda 1990 323 Workshop Manual Supplement page 200

K2
TROUBLESHOOTING GUIDE
USING THIS SECTION
Introduction
Most of the automatic transaxle control system is electrically controlled, often making it difficult to diagnose
problems in the system, especially intermittent problems. Before undertaking actual checks, take a few minutes
to talk with a customer who approaches with a drivability complaint. The customer is often a good source
of information on such problems, especially intermittent ones. Through talks with the customer, one can find
out what the symptoms are and under what conditions they occur.
-
Work Flow
CHECK IN
I
LISTEN TO CUSTOMER COMPLAINTS
I
REFER TO TROUBLESHOOTING PAGE THAT
CORRESPONDS TO ACTUAL SYMPTOM
I
,------CHECK FOR WHAT IS BAD IN SYSTEM - - - - - - - - - - - - - Inspection
CHECK FOR WHAT PART IS BAD
- - - - - - T - - - - - - Action
I
I
I
REPAIR I REPLACEMENT - - - - - - - - -J
I
No
DETERMINE IF TROUBLE HAS BEEN ELIMINATED
Yes 1
CHECK OUT
Diagnostic Index
No.:
Each troubleshooting item is
assigned a number.
Troubleshooting Item:
There are 24 troubleshooting
items. Choose the item that
most closely corresponds to
the actual symptom.
03UOKX-019
Description:
Describes each troubleshooting
item.
Page:
Shows the reference page.
03UOKX-020
K2-24