Mazda 1990 323 Workshop Manual Supplement page 356

K2
TRANSAXLE
8. Install the dished plate with the dished side downward.
03UOKX-23
03UOK2-16!
03UOKX-240
1
8611078-215
Note
l
Installation order: Driven-Drive-Driven-Drive
9. Install the drive and driven plates.
10. Install the retaining plate.
Il. Install the snap ring.
12. Measure the coasting clutch clearance.
(1) Measure the clearance between the snap ring and the
retaining plate of the coasting clutch.
(2) If the clearance is not within specification, adjust it by
selecting a proper retaining plate.
Coasting clutch clearance:
1.0-l .2mm (0.040-0.047 in)
Retaining plate sizes
mm (in)
4.6 (0.1811) 4.8 (0.1890)
5.0 (0.1969)
5.2 (0.2047) 5.4 (0.2126) 5.6 (0.2205)
Forward clutch
1. Install the dished plate with the dished side downward.
Note
l
Installation order:
Driven-Drive-Driven-Drive-Driven-Drive
2. Install the drive and driven plates.
3. Install the retaining plate.
4. Install the snap ring.
5. Measure the forward clutch clearance.
(1) Measure the clearance between the snap ring and the
retaining plate of the forward clutch.
(2) If the clearance is not within specification, adjust it by
selecting a proper retaining plate.
Forward clutch clearance:
1.0-I .2mm (0.040-0.047 in)
Retaining plate sizes
mm (in) -
5.9 (0.2323) 6.1 (0.2402)
6.3 (0.2480)
6.5 (0.2559)
6.7 (0.2638) 8.9 (0.3504)
I
03UOK2-170
K2-180