Mazda 1990 323 Workshop Manual Supplement page 431

TRANSAXLE AND TRANSFER UNIT
K2
86UO7B-361
03UOKX-42f
CLEARANCE
L
76G07B-72
I
03UOKX-42
Note
l
Read the preload when the output gear starts to
turn.
Caution
l
Measure the clearance around the entire circumfer-
ence, and select shims equivalent to the maximum
clearance.
. The maximum allowable number of shims is 7.
(12) Measure the clearance. Select adjustment shim(s)
equivalent to the measured clearance.
(13) Remove the bearing housing and
SST.
(14) Install the required shim(s) and press the bearing race
into the bearing housing with the
SST.
(15) Install the bearing housing.
Tightening torque:
19-26 Narn (1.9-2.6 m-kg, 14-19 ft-lb)
(16) Verify that the preloadlpull scale reading is within specifi-
cation. If not within specification return to Step (3).
Preload:
0.03-0.9 N,rn (0.3-9.0 cm-kg, 0.26-7.81 in-lb)
Reading on pull scale:
0.3-9 N (0.03-0.9 kg, 0.066-1.98 lb)
(17) Remove the bearing housing and output gear assembly.
K2-255