J3
TRANSAXLE
AND TRANSFER
UNIT
Idler Gear Assembly
1. Disassemble in the order shown in the figure, referring to Disassembly
Note.
2. inspect all parts and repair or replace as necessary.
1
',&'
1. Bearing inner race (Idler gear side)
Disassembly Note . . . . . . . . . . . . . . . . . . . . . page J3-40
2. Idler gear
Inspect gear teeth for wear and cracks
3. O-ring
4. Joint sleeve
5. Bearing inner race (Joint sleeve side)
Disassembly Note . . . . . . . . . . . . . . . . . . . . . page J3-40
.
I
03UOJ3-074
Bearing inner race (Idler gear side)
1. Fit a punch through a hole in the idler gear and tap off the
bearing inner race.
Bearing inner race (Joint sleeve side)
Caution
l
Hold the shaft with one hand so that it does not fall.
1. Remove the bearing inner race with the SST.
03UOJ3-075
J3-40