Mazda 1990 323 Workshop Manual Supplement page 406

1990 mazda 323 4-wheel drive workshop manual supplement

Hide thumbs Also See for 1990 323:

Table of Contents

AND TRANSFER

Do not mix-up the front and rear gaskets during as-

Match the bolt head letter and the control valve body

1. Install the orifice check valves (41.5mm,

0.059 in; $1 .Omm,

0.039 in) and springs

in the rear control

body as shown.

2. Install the gaskets on both sides of the rear separator;

install it onto the rear control

The main/rear rear gasket and main/rear front gas-

ket are not interchangeable.

3. Install the orifice check valve ($2.5mm,

0.098 in) and spring,

and the steel ball in the main control

body as shown.

Show Quick Links

Chapters

Table of Contents