TRANSAXLE
AND TRANSFER
UNIT
K2
Disassembly / Inspection
/ Assembly
1. Disassemble
as in the shown in the figure,
referring
to
Disassembly
Note.
2. Inspect all parts and repair or replace
as necessary.
3. Assemble
in the reverse order of disassemblv,
referring
to
Assembly Procedure,
03UOK2-183
1. Snap ring
2. Retaining
plate
3. Drive and driven
plates
Inspect
for wear and burning
Inspection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page K2-194
4. Snap ring
Disassembly
note .,,.....,,......,..
page K2-194
5. Spring
and retainer
assembly
Inspection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page K2-194
6. Low and reverse brake piston
Disassembly
Note . . . . . . . . . . . . . . . . . . page K2-194
Inspection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page K2-194
7. Outer seal
8. Inner seal
9. Transaxle
case
K2-193