K2
TRANSFER
CARRIER OIL
03UOKZ084
TRANSFER
CARRIER
OIL
INSPECTION
Note
l
Park the vehicle on level ground.
1. Remove
the check
plug.
2. Verify that the oil is at the bottom
of the plug port.
If it is low, add the specified
oil from plug port.
3. Install the check
plug.
Tightening
torque:
39-58
N*m (4.0-6.0
m-kg, 28-43
ft-lb)
REPLACEMENT
1. Remove the drain plug. Drain the oil into a suitable container.
2. Install the drain plug.
Tightening
torque:
39-58
N.m (4.0-6.0
m-kg, 28-43
ft-lb)
3. Add the necessary
amount
of the specified
oil through
the
plug port.
Specified
oil: SAE 75W-90
Capacity: 0.5 liter (0.53 US qt, 0.44 Imp qt)
K2-136