Mazda 1990 323 Workshop Manual Supplement page 494

M
REAR AXLE
03UOMX-819
I
03UOMX-82
I
03UOMX-827
r
Assembly Note
Wheel stud
1, install the new wheel studs with a press.
.-
03UOMX-822
Dust cover
1 I Mark the new dust cover the same as the one removed,
2. Align the marks of the new dust cover and the knuckle.
Caution
l
Install the new dust cover as shown.
3. lnstali the new dust cover.
Wheel bearing
1. Press the new wheel bearing in with the SST.
03UOMX-82:
Dust cover
Caution
l
Do not remove the dust cover if not necessary.
l
Do not reuse the removed dust cover.
1. Mark the
dust
cover
and
knuckle for proper reassembly.
2. Remove the dust cover with a chisel.
Wheel studs
Caution
l
Do not remove the
wheel studs unless necessary.
l
Do not reuse the removed wheel.
1. Remove the wheel
studs with
a press.
M-10