Mazda 1990 323 Workshop Manual Supplement page 531

ENGINE SPEED SENSING POWER STEERING
N
03UONX-824
93GONX-042
93GONX
I
03UONX-825
1
93GONX-04!
Oil seal
I, Use the SST to install a new oil seal to the gear housing.
Note
l
Apply grease to the oil seal.
Seal ring
I. Use the SST to install a new seal ring to the valve part of
the pinion shaft.
2. After installing it, use the SST to seat it properly.
3. Use the SST to install the pinion shaft assembly to the gear
housing.
Plug
1. Use the SST to press in a new oil seal.
2. Press in by placing the flat piate against the bearing.
Caution
l
Apply grease to the oil seal and bearing.
3. Use the SST to tighten the plug to the gear housing.
N-l 5