Mazda 1990 323 Workshop Manual Supplement page 420

K2
TRANSAXLE AND TRANSFER UNIT
63G07C-14
6. Install the gear case needle bearings and differential lock
thrust washer.
7. Install the differential lock gear sleeve, differential lock hub
and gear case needle bearing.
8. Measure the clearance between the differential lock hub and
the gear case needle bearing.
If the clearance is not within specification, select the prop-
er differential lock thrust washer.
Standard: 0.15-0.30mm (0.006-0.011 in)
Available washer thickness:
1.20mm (0.047 in), 1.35mm (0.053 in),
1.50mm (0.059 in), 1.65mm (0.065 in),
1.80mm (0.071 in)
9. Install the bearing inner race with a press and the SST.
K2-244