Mazda 1990 323 Workshop Manual Supplement page 448

K2
TRANSAXLE AND TRANSFER UNIT
03UOK2-282
03UOK2-283
03UOK2-26
I . I
03UOK2-28
34. Install the oil pan along with a new gasket.
Tightening torque:
8-11 N-m (85-110 cm-kg, 74-95 in-lb)
-
Note
0 Install the magnets in the positions shown in the il-
lustration.
35. Align the manual valve with the pin on the manual plate,
and install the control valve body into the transaxle case.
Tightening torque:
1 l-15 Nom (11 O-150 cm-kg, 95-130 in-lb)
36. Install the solenoid connector and a new O-ring in the trans-
axle case.
37. Install a new O-ring on the bracket; then feed the throttle
cable through the transaxle case and connect it to the throttle
lever.
38. Install the throttle cable bracket and attaching bolts.
Tightening torque:
@ 8-l 1 N.m (80-l 10 cm-kg, 69-95 in-lb)
@ 19-26 N#m (1.9-2.6 m-kg, 14-19 ft-lb)
39. Install the control valve body cover along with a new gasket.
Tightening torque:
8-l 1 Nm (85-l 10 cm-kg, 74-95 in-lb)