Supplemental Service Information; Removal; Procedure - Mazda 1990 323 Workshop Manual Supplement

B
SUPPLEMENTAL SERVICE INFORMATION, REMOVAL
SUPPLEMENTAL SERVICE INFORMATION
The following points in this section are changed in comparison with Workshop Manual (1195..lo-89E).
Engine
l
Removal
l
Installation
REMOVAL
Warning
l
Release the fuel pressure.
PROCEDURE
1. Disconnect the negative battery cable.
2. Drain the engine coolant and transaxle oil.
3. Remove in the order shown in the figure, referring to Removal Note.
Step 1
'ATX ONLY
1. Undercover
2.
Side cover
12. Oil cooler hose (ATX)
13. Radiator bracket
03UOBX-808
3. Resonance chamber and air cleaner assembly
4. Battery bracket and battery
14. Radiator and cooling fan assembly
15. P/S and/or A/C drive belt
5. Battery carrier and battery duct
6. Accelerator cable
7. Radiator hose
8. Coolant reservoir hose
9. Cooling fan connector
10.
Radiator switch connector (ATX)
11. A/C cut switch connector (ATX)
16. P/S oil pump and bracket
Removal
Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-7
17. A/C compressor
Removal Note.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-7
18. Crossmember
19. A/C compressor bracket
20. Coolant reservoir
B-6