Mazda 1990 323 Workshop Manual Supplement page 48

B
INSTALLATION
03UOBX-84
-/ r--+-Lb
03UOBX-84
P/S oil pump and bracket
1. Install the P/S oil pump and bracket.
Tightening torque:
37-52 N-m (3.8-5.3 m-kg, 27-38 ft-lb)
Drive belt
1. Install the P/S and/or A/C drive belt.
2. Adjust the drive belt deflections.
Radiator and cooling fan assembly
1. Install the radiator and cooling fan assembly.
Tightening torque:
7.8-l 1 N-m (80-l 10 cm-kg, 69-95 in-lb)
2. Connect the cooling fan connector.
3. Connect the radiator switch connector. (ATX)
,I
4. Connect the A/C cut switch connector.
5. Connect the oil cooler hose. (ATX)
6. Connect the coolant reservoir hose.
7. Connect the upper and lower radiator t-
Caution
03UOBX-842
(ATXj
loses.
l
Position the hose clamp in the original location ori
the hose, and squeeze the clamp lightly with large
pliers to ensure a good fit.
Accelerator cable
1. Install the accelerator cable.
2. Adjust the cable deflection by turning nuts A.
Deflection: l-3mm (0.04-0.12 in)
Battery duct, battery carrier, and battery
1. Install the battery duct.
2. Install the battery carrier.
Tightening torque:
19-25 N.m (1 .Q-2.6 m-kg, 14-19 ft-lb)
3. Install the battery and the battery bracket.
Tightening torque:
2.9-5.9 N#rn (30-60 cm-kg, 26-52 in-lb)
-'
03UOBl - 198
B-22