Mazda 1990 323 Workshop Manual Supplement page 359

1990 mazda 323 4-wheel drive workshop manual supplement

Hide thumbs Also See for 1990 323:

Table of Contents

TRANSAXLEANDTRANSFERUNIT

of one-way clutch

clutch inner race.

the thrust bearing.

4. Inspect the one-way clutch inner and outer races, and re-

place if necessary.

5. Apply petroleum

jelly to the thrust bearing to secure it; then

install it to the one-way

clutch inner race.

Thrust bearing outer diameter:

Check that the spring cage of the one-way clutch

faces toward the outer race.

6. Install the one-way clutch into the one-way clutch outer race.

7. Install the one-way clutch inner race into the one-way clutch

outer race by turning

inner race counterclockwise.

8. Hold the one-way

clutch outer race. Check that the inner

race turns only counterclockwise.

Show Quick Links

Chapters

Table of Contents