Mazda 1990 323 Workshop Manual Supplement page 387

TRANSAXLE AND TRANSFER UNIT
03UOK2-20 ' 2
86UO7B2t $8
8611078-269
8611078.27 0
7
ORIFICE 60.8mm (0.071 in) AND SPRING
Disassembly Procedure
1. Remove the 3-4 solenoid valve and lockup solenoid valve.
2. Remove the O-rings and oil strainers.
3. Remove the 1-2 solenoid valve and 2-3 solenoid valve and
wire harness.
4. Remove the O-rings and oil strainers.
5. Remove the front indicated bolts and pull out the front con-
trol body with premain separator as a unit.
6. Remove the front/premain gaskets and separator from the
front control body.
7. Remove the orifice check valve (+0.8mm, 0.071 in) and
spring from the premain control body.
86UO7B-271
K2-211