Mazda 1990 323 Workshop Manual Supplement page 139

TRANSAXLE AND TRANSFER UNIT
53
4. If the medium-size gear case needle bearing can be in-
stalled, measure the clearance between the ring gear case
and the needle bearing.
5. If the clearance exceeds 0.06mm (0.002 in), install the large-
size gear case needle bearing.
USE MEDIUM-SIZE
NEEDLE BEARING
NEEDLE BEA
(PART No. GOD0 27 518) (PART No. GOD0
03UOJ3228
I
I
03UOJ3-114
r
Clearance: 0.15-0.30mm (0.0059-0.0118 in)
4. If the clearance is not within specification, select the prop-
er washer from the chart below.
03UOJ3-ll!
Adjustment of front ring gear clearance
1. Install the washer and front differential gear case.
2. Install the needle bearing and differential lock hub.
3. Measure the clearance between the front ring gear and nee-
dle bearing.
1
5
Washer thickness mm (in)
1.20 (0.0472)
1.35 (0.0531)
1.50 (0.0590)
1.65 (0.0649)
1.80 (0.0708)
I
Bearing inner race (Gear sleeve side)
1. Install the bearing inner race with the SST.
J3-61