Mazda 1990 323 Workshop Manual Supplement page 482

L
PROPELLER SHAFT
03UOLX-813
I
STGOLX-013
03UOCX-814
Disassembly Note
Snap ring
1 1 Mark the yoke and propeller shaft for proper reassembly.
2. Ctamp the propeller shaft in a vise.
3. Remove the snap ring.
Bearing cup
1. Push one bearing cup out of the propeller shaft by tapping
the propeller shaft yoke.
2. Remove the opposite bearing cup in the same manner.
3. Separate the propeller shaft and yoke.
4. Clamp the yoke in a vise.
5. Remove the bearing cups and the spider from the yoke as
in Steps 1 and 2.
Locknut
1. Align the marks on the center propelter shaft and yoke.
2. Remove the nut and lock washer.
3. Remove the yoke with the
SST.
Center bearing support assembly
1. Remove the center bearing support assembly with the SST.
1
03UOLX-8 15
L-8