First Call To The Vcare System - Konica Minolta bizhub PRO 950 Setup Instructions

J. First Call to vCare System
1. After cycling power, re-enter the [CS Remote Care] settings in Tech Rep Mode.
2. Press [ID Code] and enter a seven digit Tech ID Number in the [ID Code] field.
3. Press [ID Code] a second time and then select the now available [Detail Settings]
button.
4. From the [HTTP(Simplex) Setting Menu], select [Basic Setting].
5. Press the "First Call" button.
Note: It is important to wait 1 minute on this screen after pressing the "First Call" button.
If a transmission error occurs against the center, Check the error code table located in
the Machine field service manual Page 269.
6. Wait 3 minutes.
Konica Minolta bizhub PRO 950 Main Body bizhub vCare One Way HTTP Setup Guide
Page 21 of 26