Exit (Mst); Abort (Mst) - Dell PowerConnect 5324 Command Line Interface Reference Manual

Name:
Region1
Revision: 1
Instance Vlans Mapped
-------- ------------
0 1-9,21-4094
1 10-20

exit (mst)

The exit Configuration mode command exits the MST configuration mode and applies all
MST
configuration changes.
Syntax
exit
Default Setting
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example exits the MST configuration mode and saves changes.
Console(config) # spanning-tree mst configuration
Console(config-mst) # exit

abort (mst)

The abort Configuration mode command exits the MST configuration mode without applying
MST
the configuration changes.
Syntax
abort
Default Setting
This command has no default configuration.
State
-------
Enabled
Enabled
Spanning-Tree Commands
275