Routing Traffic To An Isp - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

IP Routing—Configuring Static Routes

Routing Traffic to an ISP

Configure a default route to the ISP router:

ProCurve(config)# ip route 0.0.0.0 /0 ppp 1

Syntax: ip route 0.0.0.0 /0 <subnet mask | /prefix length> <next hop A.B.C.D | forward-

ing interface ID>

Again, you should specify the WAN interface as the forwarding interface so

that the route is still valid even if the IP address changes.

Table of Contents