Viewing Information About Demand Routing; Viewing The Status Of The Demand Interface - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Viewing Information about Demand
Routing
You can use show commands to view different aspects of your demand routing
configuration. For example, you can view the status of a demand interface and
any dial-up connections that are established through a demand interface.
Table 8-14 lists the show commands for demand routing.
Table 8-14. show Commands for Demand Routing
Command
show interface demand <number>
show demand interface demand
<number>
show interface <dial-up interface>
<slot>/<port>
show demand sessions
show demand resource pool <pool
name>
show running-config
show running-config interface
demand <number>

Viewing the Status of the Demand Interface

To view the status of the demand interface, enter the following command from
the enable mode context:
Syntax: show interfaces demand <number>
For example, to view the status of demand interface 1, enter:
ProCurve# show interfaces demand 1
Configuring Demand Routing for Primary ISDN Modules

Viewing Information about Demand Routing

Description
displays the status of the demand interface
displays a summary of information about the demand
interface, including the timers, state, physical
interface in use (if connection is up), last outgoing call,
and last incoming call
displays status of physical interface
displays information about existing dial-up
connections established through demand routing
lists the resources assigned to the resource pool and
the demand interface associated with the resource
pool
displays the current configuration
displays the current configuration for a demand
interface
8-61