Using the Web Browser Interface for Basic Configuration Tasks
Configuring Ethernet Interfaces
14-38
View Statistics for the PPP Interface
Status information is displayed at the bottom of the Configuration PPPoE
window. After you apply your changes, the PPP Link State will be "starting,"
indicating that the ProCurve Secure Router OS is trying to establish a PPP
connection with its peer. Ensure that the PPP Link State is eventually "up."
For information about troubleshooting PPPoE, see "Troubleshooting PPPoE"
on page 7-50.
This readout is not in real-time. To update the readout to the current statistics,
click the Continuous Refresh button. To stop continuous refresh, click the
Stop Updates button. To reset the statistics, click the Clear Statistics button.
Figure 14-28.View Statistics for PPPoE